Chrysler 300M Service Manual page 93

2 - 60 WHEEL ALIGNMENT
WHEEL ALIGNMENT (Continued)
VEHICLE
CONCORDE/300M
INTREPID
SPECIFICATIONS
WHEEL ALIGNMENT
NOTE: All specifications are given in degrees.
NOTE: All wheel alignments are to be set with the
vehicle at curb height. Refer to CURB HEIGHT MEA-
SUREMENT.
FRONT WHEEL ALIGNMENT
CAMBER
Cross Camber (Maximum Side-To-Side
Difference)
CASTER
Cross Caster (Maximum Side-To-Side
Difference)
TOTAL TOE*
REAR WHEEL ALIGNMENT
CAMBER
TOTAL TOE*
THRUST ANGLE
NOTE:
*TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE must be equally split between
each front wheel to ensure the steering wheel is centered after setting toe. Positive (+) is Toe-in, Negative ( ) is
Toe-out.
CURB HEIGHT SPECIFICATIONS
FRONT
739 mm ± 20 mm
29.09 in. ± 0.79 in.
729 mm ± 20 mm
28.70 in. ± 0.79 in.
PREFERRED SETTING
PREFERRED SETTING
754 mm ± 20 mm
29.68 in. ± 0.79 in.
735 mm ± 20 mm
28.93 in. ± 0.79 in.
0.00°
0.00°
+3.00°
0.00°
0.00°
0.20°
+0.10°
0.00°
LH
REAR
ACCEPTABLE RANGE
-0.60° to +0.60°
0.70°
+2.00° to +4.00°
1.00°
0.20° to +0.20°
ACCEPTABLE RANGE
0.70° to +0.30°
0.20° to +0.40°
-0.15° to +0.15°