Registering The Handset - Siemens C300H User Manual

Taking the first steps

Registering the handset

Before you can use the phone, you must first register the handset to the base. The
registration procedure will depend on the type of base.
Automatically registering the C300H handset to the Gigaset C300/
C300A base
Prerequisite: The handset must not already be registered to a base.
¼
Redial
u Each key press interrupts automatic registration.
u If the handset is already registered to at least one base or if automatic regis-
tration does not work, the handset will have to be registered manually.
Manually registering the C300H handset
You must manually register the handset on both the handset (1) and the base (2).
1) On the handset
¤ Settings ¤ Registration ¤ Register Handset
§Menu§
If the handset is already registered to four bases:
s
~
The display shows Handset is registering.
2) On the base
¤ Within 60 seconds, press and hold the registration/paging key on the base
(approx. 3 seconds).
12
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
U
Place handset
into base
Time
Û
Handset is
registering
Please note
Select base e.g., Base 3 and press
If required, enter the system PIN for the base and press
¤ Place the handset with the display fac-
ing up in the base.
The handset registers automatically. Regis-
tration can take up to 5 minutes.
Do not remove the handset from the
base during this time.
§OK§
.
§OK§
.