Registering The Handset - Siemens Gigaset S79H User Manual

Registering the handset

A Gigaset S79H handset can be registered on up to four bases. You must initiate
handset registration on the handset (1) and on the base (2).
When the registration process has completed successfully, the handset returns to
idle status. The handset's internal number is shown in the display, e.g., INT 1. If not,
repeat the procedure.
1) On the handset
Please note
If the handset is already registered to at least one base, start the registration
process as follows:
¢
v
If the handset is already registered to four bases, select the required base.
2) On the base
Within 60 sec. press and hold the registration/paging key on the base (approx. 3
sec.).
Please note
For instructions on deregistering the handsets, please consult the base user
guide.
Register
¢ ¢
Ï
Registration
¤
Press the key below
display screen.
A message appears stating that the
handset is searching for a base that is
ready for registration.
Register Handset
First steps
§Register§
on the
11