Registering The Handset - Siemens Gigaset E500H User Manual

First steps

Registering the handset

Before you can use the phone, you must first register the handset to
the base. The registration procedure will depend on the type of
base.
Automatically registering the E500H handset to the
Gigaset E500/E500A base
Prerequisite: The handset must not already be registered to a base.
set into base
Please note
u Each key press interrupts automatic registration.
u If the handset is already registered to at least one base or if
automatic registration does not work, the handset will have to
be registered manually.
14
Place hand
Menu
Ò
Handset is
registering
‰
Handset
registered
¤ Place the handset in the base
with its display facing forward.
The handset registers automati-
cally. Registration can take up to
5 minutes.
Do not remove the handset from
the base during this time.
After it has registered, the handset
display shows Handset registered
briefly and then returns to idle sta-
tus.