Using Handsfree Mode; Switching To Mute; Making Internal Calls - Siemens C300H User Manual

Making calls

Using handsfree mode

In handsfree mode, you activate the loud-
speaker so that you can hear the caller with-
out having to hold the handset to your ear.
You therefore have both hands free and
other people can listen in on the conversa-
tion.
Please note
Inform your caller before you use the
handsfree function so that the caller
knows a third party may be listening.
Activating/deactivating handsfree
mode
During a call, activate or deactivate hands-
free mode:
d
Press the handsfree key.
Each key press switches
between handset and hands-
free mode. If handsfree mode is
activated, the key is lit up.
If you wish to place the handset in the
charger during a call:
¤ Press and hold handsfree key d while
placing the handset in the base/charger
and for a further 2 seconds.
For instructions on adjusting the handsfree
volume, ¢ page 32.

Switching to mute

You can deactivate your handset's micro-
phone during a call.
v
Press right on the control key to
mute the handset. The display
shows Microphone is switched
off.
Press the key again to reactivate
the microphone.
24
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846

Making internal calls

Internal calls are free calls between handsets
that are registered with the same base.
Calling a specific handset
u
Initiate internal call.
~
Enter the number of the hand-
set.
Or:
s
Select handset.
c
Press the talk key.
Calling all handsets (group call)
u
Press and hold.
Or:
u
Initiate internal call.
*
Press the star key.
Or
Call All Select
c
Press the talk key.
All handsets are called.
Ending a call
a
Press the end call key.