Selecting Vip Ringer Tones (Handset And Base); Selecting Caller Ringer Tones (Handset And Base); Select Caller Ringer Tones; Registering The Handset (Int) - Siemens W10 User Manual

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Selecting VIP Ringer Tones (handset
and base)
Press the Mem/Prog key for 3 seconds
Press the Channel/Select key until "VIP Ring" appears
Press or to select the ringer melody. (8 melodies)
Press the Mem/Prog key for confirmation
Press Exit to exit
Note: you must apply for "Show incoming call number" service
(or Caller ID Service) to validate this function.
Select Caller Ringer Tones (handset and
base)
Press the Mem/Prog key for 3 seconds
Press the Channel/Select key until "Int Ring" appears
Press or to select the melody. (8 melodies)
Press the Mem/Prog key for confirmation
Press Exit to exit

Registering the Handset (INT)

You can register up to four handsets on your base. During the
registration, place the handsets close to the base. If you want to
know the registration number of each handset, press the "INT"
key on the handset, then the register number will be displayed
on the handset (HS 1, HS 2, HS 3, or HS 4).
Long press the "INT" key on the base (do not release until
registration for all handsets has been completed), until "CodE
____" is displayed on the LCD of the base.
Press the "INT" key on a handset (the handset and the base will
respectively display "HS 1" and "CodE ____" register numbers,
and when both the handset and the base ring, you can release the
key on the handset, then release the key on the base).

Activating/deactivating Ringer

Handset

Activating ring

Be sure the handset is in standby.
Press the Mem/Prog key.
Then press the # key,the handset will sound a confirmation tone.
10