Setting The Date And Time - Siemens C300H User Manual

Taking the first steps

Setting the date and time

Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
Depending on your network provider, the date and time may be displayed
automatically.
Redial
Enter Date:
[04.04.2010]
x
Back
Enter Time:
[07.15]
x
Back
14
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
Please note
INT 1
Time
OK
OK
¤ Press the key below
screen to open the input field.
(If you have already set the time and
date, open the input field via the menu
¢ page 22.)
The Date/Time submenu is shown on the
display.
¤ The active input position flashes.
Enter the day, month and year as an
8-digit number via the keypad
e.g., Q4Q42Q Q
for 4 April 2010.
To change the input position
e.g., to correct an entry, press
right or left on the control key.
¤ Press the key below
screen to save your entry.
¤ Enter the hours and minutes in 4-digit
format via the keypad e.g., QM 5
for 07:15 am.
Change the input position with the con-
trol key if necessary.
¤ Confirm with
§Time§
on the display
§OK§
on the display
§OK§
.