Registering The Handset - Siemens Gigaset SL400H User Manual

First steps
Placing the handset in the charger
¤
Place the handset in the charger with its display facing forward.
To charge the battery, leave the handset in the charger.
Please note
The handset must only be placed in the product-specific base/charger.

Registering the handset

Your Gigaset handset can be registered on up to four bases. You must register the
handset on both the handset (1) and the base (2).
Once the registration process has been completed successfully, the handset returns
to idle status. The handset's internal number is shown in the display, e.g., INT 1. If
not, repeat the procedure.
1) On the handset
Please note
If the handset is already registered to at least one base, start the registration
process as follows:
¢
v
If the handset is already registered to four bases, select the required base.
2) On the base
Within 60 sec. press and hold the registration/paging key on the base
(approx. 3 sec.).
Please note
For instructions on deregistering the handsets, please consult the base user
guide.
10
Register
Ï ¢ ¢
Registration
¤
Press the key below
display screen.
A message appears stating that the
handset is searching for a base that is
ready for registration.
Register Handset
§Register§
on the