Troubleshooting - Sony PCS-1 Operating Instructions Manual

Troubleshooting

If the Communication Terminal does not function correctly, check the following.
Symptom Cause
The power is not The power switch is not set to on.
turned on.
The batteries in the Remote
Commander are low or dead.
Three indicators on The fan inside the Terminal stops.
the front of the
Communication
Terminal blink.
No sound or the The volume of the System is too
volume is very low. low.
The volume of the TV monitor is
too low.
The microphone on the remote
party is turned off.
"Mic Select" is not set properly.
Audio input is not selected
properly.
The microphone or external
equipment is not connected
correctly.
Picture is blurred. Manual focus is selected but picture
remains blurred.
When auto focus is selected, the
background is too bright, contrast is
too high, or the background or the
participants' clothes contain fine
line patterns.
Solution
Set the power switch to on (
25).
Replace the batteries with new ones
(page 23).
Turn off the system immediately and
consult with Sony dealer.
Adjust the sound volume by pressing
the VOLUME +/– buttons on the
Remote Commander (page 28).
Adjust the volume of the TV monitor.
Ask the remote party to turn on the
microphone.
Set up "Mic Select" properly
according to the microphone to be
used (page 46).
Set up "Input Select" properly (page
46).
Check the connection (pages 114, 119
and 129).
Adjust the focus (page 86).
Select manual focus and adjust
manually (page 87).
Troubleshooting
@
) (page
191