Sony PCS-1 Operating Instructions Manual page 163

The system begins dialing the number of the remote party with the
" Dialing (LAN)", "
ISDN)"appears on the monitor screen, and the ON LINE indicator (blue) on
the Communication Terminal blinks.
When the system connects to all the parties, the message "Meeting starts!"
appears on the screen, and the ON LINE indicator stops blinking and lights.
To call remote parties not registered in the Phone Book
Basic operations are the same as those for starting a point-to-point conference.
For details, see "To call a remote party not registered in the Phone Book" on
page 71.
1
Select "Dial" in the launcher menu to open the Dial menu.
2
Select the line interface you are using for multipoint connection under
"Line I/F".
Select "
connection, and
Dial
3
Set up the line interface of the remote parties.
When "
Enter the IP addresses of all the parties in the A to E text boxes.
When "
Enter the telephone numbers of all the parties in the A to E text boxes.
To register a normal phone, enter the telephone number with "T" at the
beginning. (e.g., T0312345678)
When "
Select the interface (LAN or ISDN) used from the drop-down list on the right
of the A to E text boxes, then enter the IP addresses for the LAN connection
Dialing (ISDN)" or "
LAN" to use LAN connection, "
" LAN & ISDN" to use LAN and ISDN connections
IP
A2 A2
B1 B1
B2 B2
More Options Dial
LAN" is selected
ISDN" is selected
LAN&ISDN" is selected
Dialing (LAN &
ISDN" to use ISDN line
Line I/F
LAN
LAN
ISDN
1024 Kbps
ISDN
LAN&ISDN
ISDN (2B)
ISDN (Telephone)
Save
Starting a Multipoint Videoconference
marks.
.
163