Encryption Via Lan Menu; Registering A Remote Party - Phone Book; Registering A New Remote Party - Sony PCS-1 Operating Instructions Manual

Encryption via LAN Menu

The Encryption via LAN menu is used to
conduct a videoconference using the
encryption feature. The encryption feature
enables connection to those terminals only
that have entered the preset password,
allowing you to conduct a highly
confidential conference.
For details on a videoconference with the
encryption feature, see Chapter 7.
Encryption via LAN
Page: 1/1
Encryption via LAN
Encryption Password
Encryption via LAN
Selects whether or not to use the encryption
feature for a videoconference.
On: Uses the encryption feature for a
videoconference.
Off: Does not use the encryption feature for
a videoconference.
Encryption Password
Enter the password required for starting a
conference with the encryption feature.
Notes
• When "Encryption via LAN" is set to "On",
you cannot start a conference with a terminal
not equipped with the encryption feature, a
terminal with "Encryption via LAN" set to
"Off", or a terminal with a different
encryption password. You can start a
conference without using the encryption
feature with a terminal connected via an
ISDN.
• The Encryption via LAN menu is not
available when you connect to other
terminals by LAN&ISDN cascade
connections.
60
Registering a Remote Party – Phone Book
Off
Save Cancel
Registering a
Remote Party –
Phone Book
You can register the telephone number or IP
address of a remote party in the Phone Book,
allowing you to dial the party very easily.
Up to 500 remote parties can be registered in
the Phone Book. You can also store a still
image such as a participant's portrait in the
index list.
You can also create a Private Phone Book in
a "Memory Stick" separately from the
Phone Book in the Communication
Terminal.
Registering a New Remote
Party
1
Use the V, v, B or b button on the
Remote Commander to select "Phone
Book" in the launcher menu, then
press the PUSH ENTER button.
The Phone Book menu opens.
Phone Book
RECENT
2
Use the V, v, B or b button on the
Remote Commander to select "New
Entry", then press the PUSH ENTER
button.
Recent
0-9
A-I
J-S
T-Z
New Entry