Download  Print this page

Brightness; Adjusting The Focus And Brightness - Sony PCS-1 Operating Instructions Manual

Video communication system.
Hide thumbs


Press the V, v, B or b button to adjust the camera angle so that the desired
angle of view is obtained.
Use the ZOOM button to zoom in or out.
Press the ZOOM T button to zoom in (to enlarge image), and the ZOOM W
button to zoom out (to obtain wider range of image).
Press the PUSH ENTER button.

Adjusting the Focus and Brightness

Normally, the focus and brightness are automatically adjusted to obtain
optimum levels. You can also adjust them manually.
It is recommended that the focus and brightness be adjusted automatically.
To set the system to camera adjustment mode
Press the MENU button on the Remote Commander to display the Setup
menu, then press the V or v button to select the
The Camera menu appears.
Use the V, v, B or b button to select "Adjustments", then press the PUSH
ENTER button.
The color of the screen frame changes, then you can adjust the camera angle
and zoom.
The guidance for operations will be displayed under the screen.
While in communication, press the FAR/NEAR button on the Remote
Commander to select the camera to be adjusted.
When the remote camera is selected, the FAR indicator is displayed.
When the remote camera is selected, only manual focus adjustment is available.
Adjusting the Camera
Preset Save
Preset Load
Use the following Remote Commander buttons to
adjust the camera.
: Auto adjustment On.
: Focus+.
: Focus-

: Brightness.

: Backlight On/Off.
(camera) icon.


Table of Contents

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: