Using Two Monitors - Dual Monitor - Sony PCS-1 Operating Instructions Manual

Using Two Monitors – Dual Monitor
The Communication Terminal enables you to connect two monitors. One
monitor can be used exclusively for monitoring motion pictures. (Dual
Monitor system)
To connect the second monitor
Connect the second monitor to the VIDEO OUT MONITOR SUB or RGB
OUT connector on the Communication Terminal.
When you are using Sony monitors, insert the IR repeater under the remote
sensor of the second monitor and connect it to the IR OUT 2 jack on the
Communication Terminal.
First monitor
MONITOR SUB
Activating dual monitor system
Set "Dual Monitor" to "On" in Page 1 of the General Setup menu. The default
setting is "Off" (page 47).
When set to "On", the first monitor is used exclusively for monitoring motion
pictures while still images are displayed on the second monitor.
For details, see "Switching the Picture Displayed on Dual Monitors" on page
113.
AUDIO OUT VIDEO IN AUDIO IN
AUX1– –AUX2
(MIXED)
VIDEO OUT
AUX MAIN– MONITOR– SUB RGB OUT
to VIDEO OUT
to
RGB
OUT
Signal cable
(not supplied)
CAMERA UNIT MIC XXXX
WHITE
(PLUG IN POWER) BOARD
1 2
100BASE-TX DC 19.5V
10BASE-T
XXXXXX
IR OUT
1 2
to IR
Under the
OUT 2
IR repeater (supplied)
S-video connecting cable (not supplied)
Second monitor (projector, etc.)
Using Two Monitors – Dual Monitor
Second monitor
to S-video
input
remote
sensor
111