Sony PCS-1 Operating Instructions Manual page 49

Page 3/4
General Setup
Page: 3/4
Language
IR Repeater Mode
Control by Far End
Character Input Help
Memory Stick Format
Language
Selects the language used for messages or
menus.
You can select among from eight languages;
English, French, German, Japanese,
Spanish, Italian, Chinese and Portuguese.
IR Repeater Mode
Selects the remote control mode of the IR
repeater.
MODE 1: (For customers who are using the
PCS-1 Video Communication System
only)
Normally, select this mode.
MODE 2: (For customers who are using the
PCS-1 Video Communication System
only)
Select this mode if the System does not
operate properly with the MODE 1
setting.
MODE 3: (For customers who are using the
PCS-1P Video Communication System
only)
Normally, select this mode.
MODE 4: (For customers who are using the
PCS-1P Video Communication System
only)
Select this mode if the System does not
operate properly with the MODE 3
setting.
Control by Far End
When "Far End Camera Control" is set to
"On" in the Dial Setup menu on the local
party and in the Answer Setup menu on the
remote party, you can temporarily reject the
camera control command transmitted by the
remote party.
On: Accepts the camera control command.
Off: Rejects the camera control command.
English
MODE1
On
On
Save Cancel
Character Input Help
Selects whether or not to hide a help balloon
used for entering characters or numerics .
On: Displays the balloon help items for
entering characters.
Off: Hide the balloon help items for entering
characters.
Memory Stick Format
Formats the "Memory Stick".
Note
If you format the "Memory Stick", all the data
including the still images and Phone Book
stored will be lost.
Page 4/4
General Setup
Custom Input Label
Page: 4/4
Main
Object
AUX1
AUX2
You can label each video input displayed in
the launcher menu or Video Input Select
menu (page 91) on the local site.
Main
Enter the label to be displayed when "Main"
(main camera) is selected in the Video Input
Select menu.
Object
Enter the label to be displayed when
"Object" (optional PCS-DS150 Document
Stand) is selected in the Video Input Select
menu.
AUX1
Enter the label to be displayed when
"AUX1" (equipment connected to the
VIDEO IN AUX1 on the Communication
Terminal) is selected in the Video Input
Select menu.
AUX2
Enter the label to be displayed when
"AUX2" (equipment connected to the
VIDEO IN AUX2 on the Communication
Terminal) is selected in the Video Input
Select menu.
Registering Local Information
Save Cancel
49