ST200i USE AND CARE
Do not modify the ST200i in any way. Unauthorized modification may impair the function
and/or safety and could affect the life of the equipment. There are specific applications for which
the ST200i was designed.
Always check of damaged or worn out parts before using the ST200i. Broken parts will
affect the ST200i operation. Replace or repair damaged or worn parts immediately.
Store idle ST200i. When ST200i is not in use, store it in a secure place out of the reach of
children. Inspect it for good working condition prior to storage and before re-use.
TECHNICAL SPECIFICATIONS
Item
Power Supply
No-Load Voltage
Output Range
Duty Cycle
Suggested Electrode
Electrode Diameter
Dimensions
Weight
KNOW YOUR WELDER
Description
The KLUTCH ST200i is a portable DC Inverter Arc Welder and comes complete with a shoulder
strap for easy carrying. It operates on 230V (220-240V) AC Single phase 60 Hz power and requires
a 50 amp circuit breaker. The removable quick connect weld cables allow for easy connection, tear
down, and polarity changes. It is designed to weld mild steel and alloys with electrodes up to 5/32"
on materials up to 3/8" thick. This unit is ideal for Do-It-Yourself projects and for light maintenance.
Add the optional TIG torch #44455 for DC TIG Welding on steel and stainless steel.
Positive Output
Connection
Strap
Welding Cable And
Electrode Holder
230V, 50A, 60 HZ, Single Phase
75 Volts DC
20 - 200 Amp DC
15% @ 200A
E6013, E7014, E7018, Stainless Steel
1/16 inch to 5/32 inch
12" x 5" x 9"
9.9 lbs.
Indicator
Lights
Page
Description
Current
Adjustment
Negative Output
Connection
7
of 18
Ground Cable
And Clamp