Technical Specifications - Klutch MIG250S Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Electromagnetic Field

-Electromagnetic fields can interfere with various electrical and electronic devices such as

pacemakers.

-Consult your doctor before using any electric arc welder or cutting device

-Keep people with pacemakers away from your welding area when welding.

-Do not wrap cable around your body while welding.

-Wrap MIG gun and ground cable together whenever possible.

-Keep MIG gun and ground cables on the same side of your body.

Shielding Gas Cylinders Can Explode

High pressure cylinders can explode if damaged, so treat them carefully.

-Never expose cylinders to high heat, sparks, open flames, mechanical shocks or arcs.

-Do not touch cylinder with MIG gun.

-Do not weld on the cylinder

-Always secure cylinder upright to a cart or stationary object.

-Keep cylinders away from welding or electrical circuits.

-Use the proper regulators, gas hose and fittings for the specific application.

-Do not look into the valve when opening it.

-Use protective cylinder cap whenever possible

1.5 Proper Care, Maintenance and Repair

-Always have power disconnected when working on internal components.

- Do not touch or handle PC board without being properly grounded with a wrist strap. Put PC board

in static proof bag to move or ship.

-Do not put hands or fingers near moving parts such as drive rolls of fan

MIG 250S USE AND CARE



Do not modify the MIG 250S in any way. Unauthorized modification may impair the function

and/or safety and could affect the life of the equipment. There are specific applications for which

the MIG 250S was designed.



Always check of damaged or worn out parts before using the MIG 250S. Broken parts will

affect the MIG 250S operation. Replace or repair damaged or worn parts immediately.



Store idle MIG 250S. When MIG 250S is not in use, store it in a secure place out of the reach

of children. Inspect it for good working condition prior to storage and before re-use.