Fujitsu Siemens Computers PRIMERGY TX150 S3 Service Supplement Manual page 9

Introduction
Information/procedure
Extensions and upgrades:
I
For some components only the installation
routine is described in the Options Guide.
Removing this components proceed in
reverse order.
– Extending/replacing the main memory
– Installing accessible drives, like CD/DVD-ROM
drive etc.
– Installing the hard disk extension box
– Installing controller in the PCI slots
– Installing RemoteView components
– Installing the external SCSI interface
– Conversion standard PS to hot-plug PS
– Converting from the floorstand model to the
rack model
Cabling
Replacement routines:
– Replacing the operating panel
– Replacing the floppy disk drive
– Replacing the system fan
– Replacing the standard PS
– Replacing the Power backplane
– Replacing the SCSI backplane
– Replacing the SATA backplane
– Replacing the IDTEMP Combo
– Replacing the intrusion switches
– Replacing the processor
– Replacing the system board
Board layout
BIOS setup
Table 1: Overview of the documentation TX150 S3
Overview of the documentation
Service Supplement
Manual
Options Guide
Service Supplement
BIOS Setup
3