Fujitsu Siemens Computers PRIMERGY TX150 S3 Service Supplement Manual page 117

Converting from the floorstand model to the rack model
Ê Attach the rack front cover, close the server, connect it to the power outlet,
and switch it on as described in the chapter "Completion" on page 59ff.
To enable the rack model to be presented correctly in ServerView, proceed as
follows:
Ê Place the ServerStart CD-ROM in the drive.
Ê Under the path \Tools\System Configuration start the SCU_Chassis
Model Conversion program and change the server type to "PRIMERGY
TX150S3 Rack".
U41604-Z156-1-76
Options Guide 57