Honeywell LYNX Touch Series Installation And Setup Manual page 35

Lynx touch series
Hide thumbs Also See for LYNX Touch Series:
Table of Contents

Advertisement

SCREEN
Note: This field applies only to the LYNX Touch control.
Alarm Report Delay
Select "Alarm Report Delays". The System scrolls between the following options:
No Delay
15sec
30sec
45sec
No delay
Note: This field applies only to the LYNX Touch SIA control.
Swinger Shutdown
Select "Swinger Shutdown", the system toggles between "1 Report" and "2 Reports".
2 Reports
Note: This field applies only to the LYNX Touch SIA control.
Abort Window
Select "Abort Window". The System scrolls between the following options:
30sec
15sec
30sec
45sec
SIA The burglary abort window must be set to a minimum of 15 seconds. The sum of the
Note: The LYNX Touch SIA control validates the data entered in this field. If the selection is
Select "First Report Offset" for the Test Report. The System scrolls between the following
First Report Offset
6 Hrs
6 Hrs
12 Hrs
18 Hrs
24 Hrs
Select "Report Frequency" for the Test Report. The System scrolls between the following
Report Frequency
Never
Never
Every Day
Every 7 Days
Every 30 Days
Select "Downloader". The System displays the following options:
Downloader
Select "Phone Answer", the system toggles between "Yes" and "No".
Phone Answer
Yes
(Future Use)
Modem Speed
Slow
Select "Ans. Machine Defeat", the system toggles between "Yes" and "No".
Ans. Machine Defeat
Yes
Select "Callback Number" and enter callback number on the displayed keypad.
Callback Number
This option only appears if Answering Machine defeat is set to "No". Enter ring counter (1 –
Ring Counter
14 rings) on the displayed keypad.
2
Select "Flexible Callback", the system toggles between "Yes" and "No".
Flexible Callback
No
This option only appears if "Flexible Callback" is set to "Yes". The system scrolls between
Number
options 1, 2 and 3.
1
WWW.DIYALARMFORUM.COM
burglary abort window and the entry delays should not exceed 1 minute.
not valid the control will emit a single long beep indicating that the selection has been
rejected. The control replaces the selection with the default value "30sec.
options:
options:
Phone Answer
Ans.Machine Defeat
Ring Counter
- 35 -
LYNX Touch Installation and Setup Guide
Programming the Control
ACTION
Modem Speed
Callback Number
Flexible Callback
Number

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents