Thermistor Check; Door Switch Check - Maytag MDE2400AY Series Service Manual

Troubleshooting Procedures
To avoid risk of electrical shock, personal injury or death, disconnect power to unit before servicing, unless testing
requires power.

Thermistor check.

6 5 4 3 2 1
CN1
Remove plug and test from Red wire Pin 1 to White wire
Pin 6. Approx 60K ohms @ room temp.
©2004 Maytag Services
!
WARNING

Door Switch check.

Disconnect harness and test Blue wire Pin 2 to Blue
Wire Pin 4. Less than 1ohm
16023432 Rev. 0
6 5 4 3 2 1
CN1
13