Chapter 3 Configuring Client Pcs; Tcp/Ip Configuration - Planex BLW-03FA User Manual

Chapter 3
Configuring Client PCs

TCP/IP Configuration

To access the Internet through the BLW-03FA, you must configure the network settings
of the computers on your LAN to use the same IP subnet as the BLW-03FA. The default
network settings for the BLW-03FA are:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Note: These settings may be changed to suit your network requirements, but you must
first configure at least one computer as described in Chapter 5 to access the BLW-03FA's
web configuration interface. (See Chapter 4 for information on configuring the BLW-
03FA.)
If you have not previously configured TCP/IP for your computer, refer to "Configuring
Client TCP/IP" on page 5-1.
All PCs connected to the BLW-03FA must be in the same IP subnet as the BLW-03FA.
The default IP address of the BLW-03FA is 192.168.1.1 (where x means 2–254) and the
subnet mask is 255.255.255.0. You can set the IP address for client PCs either by
automatically obtaining an IP address from the BLW-03FA's DHCP service or by manual
configuration. See "Setting Up TCP/IP to Work with the BLW-03FA" on page 5-5.
PLANEX COMMUNICATIONS INC.
http://www.planex.com.tw
/ TEL+886-2-22191816 FAX +886-2-22190655
3
Page 9