Thermo Scientific FOCUS GC Instruction Manual page 329

Set-Up
Instruction Manual
Use the ARROWS and ENTER keys to navigate the menus.
In this page you'll need to enter the new IP assigned needed for the LAN
environment where the FOCUS GC LAN is installed. Also the netmask is
entered in the same menu section.
In this example the IP set is 192.168.0.101, so when the setup procedure is
completed, the FOCUS GC LAN will be communicating with a new IP.
Press ESC when the settings of this menu is over, to return to upper level
menu.
Press the right arrow key to select OP_mode, and then press ENTER.
Chapter 16
LAN Option Set-up
329