System Unit Cover Removal; Cover Replacement - IBM 5150 Hardware Maintenance Manual

System Unit
Cover Removal
1. Position System Unit Power switch to Off, unplug System
Unit power cord and disconnect all cables from rear of System
1"""""\
Unit.
2. Set the Display, Keyboard, and Printer away from System
Unit work area.
3. Loosen two cover retaining screws and slide cover toward front
of machine until it clears System Unit.
(Rear View)
Cover Replacement
1. Slide cover toward rear of machine.
2. Align both cover retaining screws with threaded tabs on cover;
tighten screws.
3.
Reconnect cables to System Unit.
(Rear View)
3-98