Keyboard Base Removal; Base Replacement - IBM 5150 Hardware Maintenance Manual

Keyboard
Keyboard Base Removal
1. Position System Unit Power switch to OFF, and disconnect
Keyboard cable from rear of System Unit.
~2.
Position the Keyboard with the bottom facing up and remove
the two mounting screws.
3. Rotate the Base up and out of the front retaining slots.
/
/
Keyboard Base Replacement
1.
Place tabs on front of base into retaining slots on cover and
rotate base to closed position.
~
2.
Replace mounting screws.
3.
Reconnect Keyboard cable at rear of System Unit.
3-93