Intermediate Gear Removal - IBM 5150 Hardware Maintenance Manual

Intermediate Gear Removal
1. Position Printer Power switch to OFF; unplug printer power
cord from wall outlet and disconnect Parallel Printer Cable.
2. Remove forms.
3.
Remove forms rack (See page 3-56).
4. Remove access cover (See page 3-32).
5. Remove top cover (See page 3-88).
6. Remove two screws
m
from forms feed motor mounts.
7. Remove intermediate gear retaining clip
II.
8. Slide intermediate gear
II
off shaft.
Forms Feed
Motor
3-64