Front Panel Replacement
1.
Install front panel by inserting the latch in its tracks and
positioning the panel in place on the locating pins.
2.
Install the two mounting screws that attach front panel to
,,-....
Diskette Drive.
3.
Push the LED assembly into grommet.
4.
Push the retaining collar over the back of the LED grommet.
5.
Replace retaining bushings.
Retaining
Bushings (2)
Front Panel
\
~ /atin g Pin~::~
~
~0~'
/?
I
Mounting!
,
Screws
-~----'
_ _ _
_..1iI
~:::>
6.
Replace Diskette Drive Logic Printed Circuit Board
(See page 3-26).
7.
Replace System Unit cover (See page 3-98).
~8.
Reconnect cables to System Unit.
3-19