Position the System Unit Power switch to Off, reconnect the
Display and power On. Be sure your Contrast and Brightness
controls are turned up, clockwise.
(Note: If the Message on your display is too far to the left or
right to read the entire message, press
§
to move the
message to the right or
§
to move to the left.)
The IBM Personal Computer DIAGNOSTICS
Version 1.00 (C) Copyright IBM Corp 1981
SELECT AN OPTION
0- RUN DIAGNOSTIC ROUTINES
1 - FORMAT DISKETTE
2 - COPY DISKETTE
9 - EXIT TO SYSTEM DISKETTE
INSERT DIAGNOSTIC DISKETTE IN DRIVE
A AND ENTER THE ACTION OESIRED
,I,
l~t'~
~
,;"""",,.,
""1"'"
WAS THE ABOVE MESSAGE STABLE AND READABLE
ON YOUR DISPLAY?
NO
Go to page 400-14.
YES
400-2