Press
g
and
~
(Enter). This
will
cause the System
Unit to check the Asynchronous Communications Adapter.
An error message similar to the one in the diagram below
may appear.
0:01:00
ERROR-ASYNC COMMUNICATIONS ADAPTER
1101
TEST ON SERIAL INTERFACE CARD FAILED
PRESS ENTER TO CONTINUE
DID YOU RECEIVE AN ERROR MESSAGE?
NO
Remove the Asynchronous Communications
Adapter Wrap Plug and go to page 1100-5.
YES
Replace the Asynchronous Communications
Adapter. See Section 3, "Removal/Replacement."
1100-4