Set The Administrator Settings Menu Password - TANDBERG Codec C60 Administrator's Manual

Codec C60
Contents Introduction
8

Set the administrator settings menu password

When you access the Administrator settings menu you will be asked to enter
a password. By default the administrator password is blank.
NOTE! It is highly recommended to define a password to access the
administrator settings menus. Changing these settings may affect the
behavior of the system and should be done by the system administrator.
NOTE! When you define or change the administrator password make sure
you save a copy of the password in a safe place.
Define the password
Navigate to Settings > System settings > Administrator settings >
Change password
1. On the remote control, press the # key to toggle between lower or upper
case characters and numbers: abc/ABC/123
2. Enter the password. The password you enter is hidden, as each character
is replaced with a star (*).
3. Press Save to save the changes, or Cancel to leave without saving.
4. Press Home ( ) to exit.
D14334.02—FEBRUARY 2009
Getting started
Getting started About the menus Administrator settings Settings Library
Administrator Guide
Cameras Appendices Contact us
14