Description - Ferroli TEMPRA 30 Installation, Service And User Instructions Manual

Copper wall-mounted system, gas fired boiler for central heating, fan assisted, room sealed compartment, electronic flame ignition and control
Table of Contents

Advertisement

1. DESCRIPTION

1.01 Introduction
The Tempra 30 is defi ned as a "room sealed" boiler, all air required for combustion is taken from outside the
room in which it is installed. It is a new high performance gas fi red heat generator for central heating. A special
feature of this boiler is its built-in electronic fl ame ignition and control unit making burner operation completely
automatic and safe. The main components are as follows:
• Copper heat exchanger consisting of four fi nned tubes specifi cally shaped for high effi ciency.
• Ceramic fi bre insulated combustion chamber
• 16 stainless steel bladed burners specifi cally designed for this boiler.
• Fan for discharge of combustion products and intake of combustion air.
• Differential air pressure switch. For safety reasons, this ensures the burner ignites only when the fan is functioning
correctly.
• Hermetically sealed compartment made from corrosion-resistant steel enclosing the above components.
• Combination gas safety valve with modulator, complete with pressure stabiliser.
• Pressure relief valve for the central heating circuit set to open at 3 bar.
• Built-in Expansion vessel.
• Variable speed pump.
• Central heating fl ow temperature adjustment thermostat.
• Central heating limit thermostat.
• Overheat safety thermostat.
• Electronic control unit for automatic fl ame ignition and control.
• Central heating fl ow temperature sensor.
1.02 Instructions and regulations
Assembly, installation, fi rst start up and maintenance must be carried out by competent persons only, in accordance
with all current technical regulations and directives.
C.O.S.H.H.
Materials used in the manufacture of this appliance are non hazardous and no special precautions are
required when servicing.
Related Documents
This appliance must be installed strictly in accordance with these instructions.
The Gas Safety Regulations (Installations & Use) 1996.
The Local Building Regulations.
The Building Regulations.
The Buildings Standards (Scotland - Consolidated) Regulations.
British Standards Codes of Practice:
B.S. 7593
B.S. 5546
B.S. 5440 Part 1
B.S. 5440 Part 2
B.S. 5449
B.S. 6798
B.S. 6891
B.S. 7671
B.S. 4814
B.S. 5482
Model Water Bye Laws
For Northern Ireland the rules in force apply
TREATMENT OF WATER IN DOMESTIC HOT WATER CENTRAL HEATING SYSTEMS
INSTALLATION OF HOT WATER SUPPLIES FOR DOMESTIC PURPOSES
FLUES
AIR SUPPLY
FORCED CIRCULATION HOT WATER SYSTEMS
INSTALLATION OF GAS FIRED HOT WATER BOILERS
GAS INSTALLATIONS
IEE WIRING REGULATIONS
SPECIFICATION FOR EXPANSION VESSELS
INSTALLATION OF LPG
TEMPRA 30
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents