Table of Contents
Advertisement
Features
The Tenor BX's specific features are explained below.
The gateway converts circuit switched calls to VoIP calls, the gatekeeper performs IP call routing
functions, and the border element distributes the call routing directories throughout the network.
Complete Solution in one design
The Tenor BX integrates a gateway, gatekeeper, border element, intelligent call routing, and supports
H.323/SIP, and QoS all in one solution, which is suitable for small to medium enterprises and ser-
vice provider applications.
The unit's simple plug and play embedded system architecture brings VoIP technology to your net-
work without changing your existing telephony infrastructure. Your network stays as is, and the call
type is transparent to the user. This technology boasts superior voice quality without compromising
reliability.
Multipath architecture
With its MultiPath architecture, the Tenor BX can intelligently route calls between the PBX, the
PSTN, and the IP network to achieve the best combination of cost and quality. It can also route calls
over IP to reduce costs, and then transparently "hop off" to the PSTN, to reach off-net locations.
State of the art Management system
The Tenor BX is managed by the Tenor Configuration Manager and Tenor Monitor. Through the
Configuration Manager, you can configure all options, such as signaling data, trunk groups, dial
plans, and call routing numbers. An easy-to-use Java-based installation process enables you to an
install the manager and start configuring within minutes. Through the Tenor Monitor, you can mon-
itor the health of the system, including alarms, call detail records, etc. Both the Configuration Man-
ager and Tenor Monitor provide comprehensive on-line help systems that are available at your
fingertips.
In addition, you can configure the unit through the Command Line Interface (CLI). Through this
simple telnet session, you can access all configuration options, including an online help system,
built into the CLI, which provides help for all features and functions. Just type help with the com-
mand name at any prompt, and data about that field will be displayed.
Unique Design
Tenor BX packs powerful VoIP features into one compact unit. The system's embedded design
enables you to configure the unit directly without depending on another operating system; it can be
either placed on a table or mounted in a 19" rack.
With its MultiPath technology, the Tenor can be installed without upgrades to the existing voice or
data network. Tenor connects to the data network through a 10/100 Ethernet interface, and to the
enterprise and public voice network through BRI interfaces. In addition, with a wide range of con-
Chapter 1: Overview
1-4
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Advertisement
Table of Contents
