Install Ground Safety Cable (If Required) - Quintum Tenor BX Product Manual

Install Ground Cable (if required)
The Tenor BX provides an additional Earth Ground screw (a #6 screw). This screw provides earth
ground to the unit if the AC power receptacle you are plugging into does not contain a ground prong
(the Quintum supplied power cable has a three prong connector). To provide ground via the ground-
ing screw, you will need to connect the grounding screw to a Ground Cable, which can then be con-
nected to an approved earth ground.
Connect the Ground Cable (not provided) as follows:
1. Unscrew the existing screw from the grounding hole.
2. Place the screw through the connector of the ground cable.
3. Attach the screw securely to the threaded grounding hole.
4. Connect the other end of the ground cable to a approved electrically grounded point. Consult
with a licensed electrician if you are unclear about this operation.
Figure 3-8 Install Ground Cable
Chapter 3: Installation 3-11
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299