Quintum Tenor BX Product Manual page 41

6. From the Bits Per Second drop down list box, choose 38400.
7. From the Data Bits drop down list box, choose 8.
8. From the Parity drop down list box, choose None.
9. From the Stop bits drop down list box, choose 1.
10.From the Flow control drop down list box, choose None.
11.Click Ok and a connection to the Tenor will be established. Information about the unit will scroll
on the screen.
12.Enter login and password. Both are admin by default.
13.A message will appear on the screen "Tenor BX does not have an Ethernet interface configured.
Would you like to configure an Ethernet Interface?" (y/n).
14.Type y.
15.For IP Address, enter the IP address for the Tenor unit (i.e., 192.168.1.444).
16.For Subnet Mask, enter the subnet mask (i.e.,255.255.255.0). This address is used to differentiate
the network portion of the IP address from the host portion of the IP address.
Chapter 3: Installation
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Figure 3-9
Port Settings Window
3-14