Table of Contents
Advertisement
6. Enter a user name and password (the default user name is admin; the default password is
admin). Click ok. You are now ready to configure the Tenor unit.
Once you have connected to the Configuration Manager, you can move around and configure data.
For complete information about the field definitions, valid entries, and submit information, see the
Tenor Configuration Manager/Tenor Monitor User Guide or the online help system that came with
the system.
Tenor Monitor
The Tenor Monitor enables you to view alarms for all Tenor units, as well as Call Event Records,
and Call Detail Records. There are three main functions of the Tenor Monitor.
• Alarm Monitor. Through the Alarm Monitor, you are able to view alarms for a specified IP
address, as well as display active alarms, alarm history, and deleted alarms. You can configure a
database table for the specific unit in which you would like to monitor alarms.
• Call Monitor. Through the Call Monitor, you are able to view call events for each call passing
through the Tenor, including call type, duration, call state, etc. The Call Monitor continuously
collects active, real-time call event data and displays it on the screen. You are able to select/
edit/delete a Tenor to a database table for the specific unit in which you would like to view call
events.
• Call Detail Record (CDR) Monitor. Through the CDR Monitor, you are able to view the Call
Detail Record for each call, including the call connect/disconnect times, call path, and
autoswitch information.
Through the Tenor Monitor, you can view real-time data for up to three Tenors at the same time. The
Tenor Monitor can collect up to 500,000 CDR/Call Event Records per day.
View call monitoring information as follows:
Ensure the software is installed and running.
NOTE:
1. Access the Tenor Monitor icon (located in the area in which you specified during installation. For
example, click on Start > Programs >Quintum Tenor Monitor>Tenor Monitor. The Tenor Moni-
tor will open up. The User Name and Password window will be displayed.
2. Enter a user name and password (the default user name is admin; the default password is
admin). Click OK.
You are now ready to monitor a specific Tenor unit. See the Tenor Configuration Manager/Tenor
Monitor User Guide for specific information about adding an IP address, moving around the Tenor
Monitor, using screens, and switching between IP addresses to view alarms, CDR, and call informa-
tion.
Command Line Interface
The Command Line Interface (CLI) is a Telnet-based (also accessible via serial port) list of menu
options which enable you to configure and monitor any Tenor BX unit; you can configure features
and capabilities such as numbering plans, channel usage, border element, signaling type, and routing
Chapter 4: Configuration/Monitoring
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
4-3
Advertisement
Table of Contents
