View Alarms; Display All Alarms; Display Active Alarms - Quintum Tenor BX Product Manual

View Alarms

The Command Line Interface (CLI) enables you to view alarms through the Monitor mode. You can
view active alarms, as well as view an alarm history list.
You are now ready to view active alarms and an alarm history, or both. See the sections which fol-
low:

Display all Alarms

You are able to display both active alarms and an alarm history as follows:
1. Through CLI, access the Monitor prompt.
2. Type alarm. Both active alarms and the alarm history will be displayed. See section
for field definitions.
Alarms

Display Active Alarms

1. Through CLI, access the Monitor prompt.
2. Type alarm a. The active alarms will be listed. See section
tions. If you enter alarm without a command following it, both active alarms and the alarm his-
tory will be displayed.
Chapter 5: System Alarms
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Figure 5-1 Alarm sample
How to Read
for field defini-
How to Read Alarms
5-7