Device Settings - TiVo Premiere Manual

5 Settings

Device settings

From the TiVo Central screen, select 'Settings & Messages,' then 'Settings,' then 'Remote,
®
CableCARD, & Devices.'
TM
CableCARD Decoder
This screen is typically used only during CableCARD installation.
A CableCARD decoder receives encrypted digital cable programming and decodes it for display
on your TV without the need for a cable box. Your CableCARD decoder plugs into the
CableCARD slot on the back of the TiVo Premiere.
A CableCARD decoder is available only from your cable company. It replaces your digital
cable box, and allows you to receive the same programming packages in your subscription. To
watch and record digital programming, you must install one Multi-Stream CableCARD decoder
(M-CARD). This one card will let you watch and record two shows at once.
External storage
Use this screen when you want to add or remove an external storage device.
Visit tivo.com/expand for more information on external storage solutions.
Network remote control
You can integrate your TiVo Premiere home automation and entertainment control devices on
your network. These devices include touch panel remotes and other devices that are configured
to work with TiVo's network-based remote control protocol. This setting will be enabled by
your home entertainment or automation installer.
76