TiVo Premiere Manual page 120

Remote Control Tips
Program your TiVo ® remote to control your TV or A/V receiver. See
Customize Your TiVo Remote to the right.
Press the TiVo button once to go to the TiVo Central
the My Shows list—your list of recorded shows.
Press LIVE TV to switch between tuners.
Press FAST-FORWARD and REWIND
Press PLAY to resume normal play.
REPLAY
replays the last 8 seconds of a show.
®
Press CLEAR to delete a title in a list (like the My Shows list) or to hide things
that aren't part of the show you're watching (like the TiVo channel banner).
Inserting the Batteries
1. Open the battery door:
Push the battery door where it comes to a point, near the center
of the back of the remote, to open.
2. Insert the batteries (supplied). Match the + and - marks on the
batteries to the + and - marks in the compartment.
3. Replace the battery door.
®
screen, or twice to go to
up to 3 times for 3 speeds.
Press GUIDE to see the TiVo program guide, then press ENTER or INFO (while
the guide is visible) for Guide Options that let you change the way channels
display or show only certain types of shows.
When you're viewing the TiVo program guide, press FAST-FORWARD
REWIND
to move the displayed time incrementally. Or, you can press
ADVANCE to jump 24 hours ahead and REPLAY
®
24 hours.
CHAN UP/DOWN does more than change the channel—it also pages up or
down through lists of shows or menu items.
Press ADVANCE
to move forward 30 seconds. Press and hold to catch up
to live TV or jump to the end of a recorded show. Press and hold REPLAY
to jump to the beginning of a show.
Remote Control Troubleshooting
Press any button on the remote. Does the red light above the TiVo button
on the remote flash?
If the red light does not flash, make sure the batteries are positioned
correctly in the remote. If they are correctly positioned, try a new set
of batteries.
If the red light on the remote does flash, but the lights on the front of
the TiVo Premiere do not respond to the remote, restart your TiVo
Premiere by unplugging it, waiting 15 seconds, then plugging it back
in.
See the Troubleshooting chapter for more help with your remote control.
or
to go back
®