TiVo Premiere Manual page 83

3. Point the remotes directly at each other, no more than 4 inches apart.
4. Press the corresponding button on the TV or A/V receiver remote (for example, Power).
If learning is successful, the activity light will flash 4 times. If it is not successful, it will
blink 10 times very quickly.
5. Repeat steps 2-4 for any additional buttons. NOTE: In learning mode, VOL UP and VOL
DOWN are separate buttons.
6. When done, press the TiVo button to exit learning mode and return the remote to normal
operation.
Advance button
You can customize the behavior of the ADVANCE
By default, pressing ADVANCE moves you forward 30 seconds. When you choose this setting,
you can press and hold ADVANCE to move to the end of a show, and press and hold REPLAY
to move to the beginning.
If you prefer, you can choose to have a press of the ADVANCE button move you to the end of a
recorded show, or catch up with live TV. Pressing it again takes you to the beginning of the
recorded show, or to the beginning of the saved portion of live TV.
No matter which setting you choose, if you press ADVANCE while fast-forwarding or
rewinding, you'll move to the next tick mark on the status bar. See page 36 for more
information.
® button on your TiVo remote.
Settings
4" max.
TV or A/V receiver remote TiVo DVR remote
5
75