TiVo Premiere Manual page 109

10. Power Cord Protection — Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords and plugs, convenience
receptacles, and the point where they exit from the appliance.
11. Object and Liquid Entry — Never push objects of any kind into this
product through cabinet slots, as they may touch dangerous voltage points
or short the parts, resulting in the risk of fire or electric shock. Never spill
liquid of any kind on this product.
12. Damage Requiring Service — The appliance should be serviced by
qualified service personnel when:
A.
THE POWER SUPPLY CORD OR PLUG IS DAMAGED OR FRAYED
B.
LIQUID HAS SPILLED INTO THE PRODUCT
C.
THE PRODUCT HAS BEEN EXPOSED TO RAIN OR WATER
D.
THE PRODUCT DOES NOT OPERATE NORMALLY WHEN YOU
FOLLOW THE OPERATING INSTRUCTIONS
CONTROLS THAT ARE DISCUSSED IN THIS GUIDE
ADJUSTMENT OF OTHER CONTROLS MAY RESULT IN DAMAGE
OFTEN REQUIRING EXTENSIVE WORK BY A QUALIFIED TECHNICIAN
TO RESTORE THE PRODUCT TO NORMAL PERFORMANCE
E.
THE PRODUCT HAS BEEN DROPPED OR THE CABINET DAMAGED
F.
THE PRODUCT EXHIBITS A DISTINCT CHANGE IN PERFORMANCE
13. Servicing — The user should not attempt service to the appliance
beyond that described in the Troubleshooting section of this guide. All other
servicing should be referred to qualified service personnel.
14. Cleaning — Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners; use a damp cloth for
Appendix A: Safety, FCC info, front/back panels, & specs
cleaning. If the product comes in contact with any liquid, unplug the phone
line a
it back in.
15. Power Source — This product should be operated only from the type of
power source indicated on the marking label or in this guide. If you are not
sure of the type of power supply to your home, consult your dealer or local
power company.
16. Overloaded Power Outlets — do not overload wall outlets and extension
cords, as this can result in the risk of fire or electric shock.
17. Coaxial Cable Grounding — For this product, the coaxial cable shield/
;
screen shall be grounded as close as practical to the point of entry of the
cable into the building. For products sold in the US and Canada, this is per
;
Article 800-93 and Article 800-100 of the NEC (or Canadian Electrical
;
Code Part 1), which provides guidelines for proper grounding of the coaxial
cable shield.
(
18. Electric Shock — To reduce the risk of electric shock, do not
ADJUST ONLY THOSE
,
disassemble this product. Take it to a qualified service person when service
AS IMPROPER
,
or repair work is required. Opening or removing covers may expose you to
dangerous voltage or other risks. Incorrect reassembly can cause electric
);
shock when this product is subsequently used.
19. Moving — Avoid moving the unit while it is plugged in to avoid
;
accumulative shock and vibration damage to the internal hard disk drive.
.
20. CAUTION — Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer's
instructions.
the power adapter and the unit dry thoroughly before
A
10