Table of Contents
Advertisement
2.16.3
Feeding devices for flaps, pocket bags etc.
1
When using these feeding aids the total duration of a working cycle is
reduced.
Flap, pocket bag etc. are manually positioned during the machine time
already.
All feeding devices can also be used in combination with the device for
cutting open the piping ends.
The feeding devices are equipped with a blower for a flat pocket bag.
Two different feeding devices are available for an optimum adaptation
to the respective field of application:
0745 517564 Left feeding devices, sewing length 180-220 mm
0745 517574 Right feeding devices, sewing length 180-220 mm
Switching the transfer device on
–
Switch the transfer device on in the menu item "Pocket parameters
(F1)".
Function
–
Step the right pedal back and hold it stepped down.
The right clamp 2 of the feeding device opens.
–
Insert flap or additional part in the feeding device.
–
Release the right pedal.
The flap clamp 2 closes.
–
Step forward on the right pedal and hold it stepped down.
The left flap clamp 1 opens.
–
Position the flap at the stops of the feeding device.
–
Release the right pedal.
The flap clamp 1 closes.
After the folding process
–
Step forward on the left pedal.
The flap clamps 1 & 2 swivel in the loading area and feeds the flap
automatically.
1
2
71
Advertisement
Table of Contents
