2.16.13 Set of parts "Shaped guide Lining loop triangle" for 745-34-2 methods B and F
5
With this equipment the lining loop triangle is automatically fed with the
pocket bag when sewing inside pockets. Only in conjunction with the
methods B and F.
Order No.: 0745 597614
4
3
2
1
Adjusting the shaped guide
–
Loosen the screws 2.
–
Adjust the shaped guide 3 in sewing direction 1 to the middle of the
pocket length.
–
Set the sew-in depth of the lining loop triangle 6 by lateral shifting 5
of the shaped guide 3.
–
Tighten the screws 2.
Function and operation
–
Insert the lining loop triangle 6 in the shaped guide 3.
–
Position the pocket bag 7 at stop 4 or positioning mark (thin
adhesive tape).
–
Clamp pocket bag and lining loop triangle together by stepping
back on the right pedal. Hold the lining loop triangle with one finger
so that it does not slip.
–
Feed the pocket bag with lining loop triangle by stepping on the left
pedal and start the sewing cycle.
7
6
1
87