Removing The Transport Securing Devices - DURKOPP ADLER 171 Operating Manual

54
Maximum delivery scope:
• Upper section of the machine (1) with sewing drive
• Table plate (2)
• Oil pan (not shown) - in the accessory pack
• Drawer (3)
• Frame (4)
• Pedal (5) with rod
• Setpoint device (6) with rod
• Pneumatic maintenance unit (7)
• Controller (8)
• Control panel for DAC classic (not shown)
• Reel stand with unwinding bracket (9) - in the accessory pack
• Small parts in an accessory pack
6.2

Removing the transport securing devices

All transport securing devices must be removed prior to set-up.
1. Remove the lashing straps and wooden blocks from
the machine upper section, the table and the frame.
2. Remove the supporting wedges between the machine
arm and throat plate.
Operating manual 171/173 Version 01.0 - 01/2016
Set-up