Table of Contents
Advertisement
Order No.
Optional equipment
0745 597824
Smoother for the 745-34-2 A/B
The smoother has the purpose to smooth the finished
workpiece held by the bundle clamp. Only in
combination with the table extension 0745 597674
and the roll-off device 0745 597954.
0745 597874
Set of parts "Pocket bag on flap" NA 10 and 12
for the simultaneous attaching of two pocket bag
halves and flap. Combination only in conjunction with
equipment E 3103 or E 3503 for NA 10
as well as E 3107 or E 3507 for NA 12.
0745 597884
Set of parts "Pocket bag / Piped pocket"
for the blowing of the pocket bag or the piping pocket
with equipment E 2604 or E 2606.
Use only in combination with the clamp K19.
0745 597934
Three-pack lasers
Add-on kit: for expanding the existing 5 laser marking
lamps to a maximum of 8 laser marking lamps.
(With the working method F, the standard equipment
includes 8 laser marking lamps).
0745 597944
Electromotoric tape feed/Automatic cutting
Automatic feeding and cutting of a
reinforcement strip pulled from a roll. Start time and
cutting time can be programmed
corresponding to the pocket.
0745 597954
Roll-off device
It is used to for transporting short pieces into the
stacker or to eject the pieces to be processed.
The speed and the working cycle of the roll-off device
can also be programmed.
0745 597964
Vacuum (side channel compressor)
For an accurate positioning of the material when
no in-house vacuum unit is available.
The side channel compressor can be used with the
basic unit.
0797 003031
Pneumatic connection package
Connection hose to the pneumatic supply line
with the appropriate couplings.
0745 517564
Automatic feeding, left 180 - 220 mm
For the automatic feeding of piping strips and
additional parts.
0745 517574
Automatic feeding, right 180 - 220 mm
For the automatic feeding of piping strips and
additional parts.
A
B
D
F
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
9
Advertisement
Table of Contents
