DURKOPP ADLER 745 - 34 - 2 Operating And Installation Instructions page 68

Sewing unit for runstitching of piped flap and welt pocket openings and pocket corners

Table of Contents

Function and operation

Positioning when processing double piping

–

Position the piping strip at the front or rear stop 1 for the respective

positioning point. Position the piping strip also at the lateral stop 2.

–

Carry out the loading process as described in chapter 2.15.4

(method B) or chapter 2.15.6 (method F) and start the sewing

cycle.

Positioning when processing single piping

–

Position the piping strip at the front or rear stop 1. Position the

piping strip also at the center stop 3.

Table of Contents

745-34-2