3
4
2
5
6
9
– Bend up the lock washer on the drive nut.
1
– Hold the driver
remove the drive nut together with the lock washer.
– Remove the driver together with the stop disk mounted underneath.
NOTE: the stop disk usually sticks to the driver.
– Remove the outer clutch hub
4
Removing the timing chain tensioner
– Remove the release screw
– Remove the plug
– Pull out the timing chain tensioner
7
Removing the camshafts
– Remove the screws on the camshaft bearing bridges
– Remove the camshaft bearing bridges.
– Do not lose the needle rollers and O-ring.
8
– Completely remove the camshafts
with the clutch holder 773.29.003.000 while you
1
.
together with the O-ring.
5
together with the seal ring.
6
, needle bearing
and collar sleeve
2
3
.
7
.
8
.
9
4-6