3-5
2
1
4
4
6
8
7
Mounting the engine
3
– Lift the engine into the frame from the left, position and screw in
– Mount the upper engine brace
– Mount the left radiator and tighten the radiator screws
– Mount the radiator shield
5
– Attach the electric connection
– Position the carburetor and insert in the air filter boot.
– Push the carburetor back and place the rubber sleeve
– Tighten the clamps
8
the lower
and the front
1
do not tighten them yet.
tighten yet.
clamps.
the nut.
cylinder head, slide the carburetor into the rubber sleeve.
.
8
engine fixing screws (M10x123) but
2
(all screws are M8x42), do not
3
4
and the hose and tighten the hose
5
to the starter engine and tighten
6
to 10 Nm.
on the
7