Setting Up A Configuration Environment - H3C S12500 Installation Manual

Setting up a configuration environment

Follow these steps to set up a configuration environment:
Launch a terminal emulation utility (such as HyperTerminal in Windows XP/Windows 2000). Select
Step1
Start > All Programs > Accessories > Communications > HyperTerminal to access the HyperTerminal
window. Click
appears, as shown in
NOTE:
If you use the Windows 2003 Server operating system on your PC, add a HyperTerminal, and then log in
to and manage the switch as described in this document. If you use Windows 2008 Server, Windows 7,
Windows Vista, or any other operating system on your PC, use the third party terminal software. For how
to use the third party terminal software, see the user guide or online help of that software.
Figure 42 The Connection Description interface of HyperTerminal
Enter the name of the new connection in the Connection Description dialog box, and click OK. The
Step2
system displays the interface shown in
in the window to set up a new connection. The Connection Description dialog box
Figure 42.
Figure 43. Select a port from the Connect using drop-down list.
51