H3C S12500 Installation Manual page 65

Booting Normal Extend BootWare
The Extend BootWare is self-decompressing
Done!
**************************************************************************
*
*
*
**************************************************************************
Copyright (c) 2004-2009 Hangzhou H3C Technologies Co., Ltd.
Compiled Date
CPU Type
CPU L1 Cache
CPU L2 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
cfa0 Size
NVRAM Size
BASIC CPLD Version
EXTEND CPLD Version : 003
PCB Version
The switch initiates the power-on self-test (POST) and the results are displayed at the console terminal.
Board self testing...........................
Board steady testing...
Board SlotNo...
Subcard exist testing...
DX246 testing...
PHY88E1111 testing...
CPLD1 testing...
CPLD2 testing...
NS16550 register testing...
The default switch's Mac address...
CF Card testing...
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
When the POST is completed, the switch boots the applications. The following information appears on
the terminal screen (only part of the display information is given in this example):
Starting to get the main application file--flash:/switch.bin!
The main application file is self-decompressing.............................
..........................................................................
..........................................................................
..........................................................................
..........................................................................
..........................................................................
..........................................................................
H3C S12500 BootWare, Version 1.09
: Jul 22 2009
: MPC8548E
: 32KB
: 512KB
: 1000MHz
: DDR2 SDRAM
: 1024MB
: 400MHz
: 4MB
: 128MB
: 247MB
: 1024KB
: 003
: Ver.B
55
[ PASS ]
[ 1 ]
[ PASS ]
[ PASS ]
[ PASS ]
[ PASS ]
[ PASS ]
[ PASS ]
[00:0F:11:11:10:00]
[ PASS ]
*
*
*