Connecting Power Cords - H3C S12500 Installation Manual

Figure 34 Remove the protective box
Move the ejector levers of the MPU outwards, hold the MPU by the handle, and push the MPU into the
Step2
slot along slide rails slowly.
Push the ejector levers inward to ensure close contact between the MPU and the backplane.
Step3
Position the screws into the holes and fasten them with a screwdriver to fix the MPU.
Step4
Figure 35 Install an MPU
IMPORTANT:
• Fasten the screws of each card right after you insert it.
To avoid damage to a card, do not use excessive force when installing and removing the card.
•

Connecting power cords

This section includes these topics:
43