H3C S12500 Installation Manual page 23

LED
Output
Service
Fault
Table 5 AC power module specifications
Item
Rated input voltage range
Max input voltage range
Max input current
Max output power
Power monitoring module
The power monitoring module (callout 7 in
operating status of the power supplies in real time. It is located between the power supply slot area and
the power switch.
PEM
The PEM (see
Figure 11 PEM location
Color Status
On
Green
Off
Flashing
On
Yellow
Off
On
Red
Off
Description
100 VAC to 120 VAC/200 VAC to 240 VAC; 50 Hz or 60 Hz
90 VAC to 264 VAC; 47 Hz to 63 Hz
13.3 A
2000 W at 200 VAC to 240 VAC input
1200 W at 100 VAC to 120 VAC input
Figure 1 1) provides power to the power supplies.
Description
Power is being correctly output.
No power is being output.
The power output is overloaded.
The AC power supply is experiencing an over-temperature condition.
The AC power supply is operating properly.
The AC power supply is faulty.
The AC power supply is operating properly.
Figure 9) monitors the alarm status, in-position status, and
13